Cisco Workgroupbridge

Verbindung von 2 Netzwerken mit 2 AccessPoints im 5GHz Band mit PSK
Zur Verwendung kommen 2 Cisco 3502i

Config der Root Bridge

hostname WGB-Root
!
dot11 ssid WGB
authentication open
authentication key-management wpa version 2
infrastructure-ssid
wpa-psk ascii hier-den-PSK
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
shutdown
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm tkip
!
ssid WGB
!
antenna gain 0
peakdetect
dfs band 3 block
speed basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel width 40-above
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
ip address 192.168.176.xx 255.255.255.0
!
ip default-gateway 192.168.176.xx
!
bridge 1 route ip
!

Die Workgroup Bridge